CYLINDRICAL EDGE ROLLING MACHINE S-31, S-31D

Our machine is suitable to roll the PVC or PET cylindrical edge into the inner side. It is used to instead of injection tank.

This method could use only about 0.2 mm ~0.3 mm PVC or PET sheet, and the two sides of cylinder could be rolled. it will let the container feel strong when we touch it.

Function:
This machine is suitable to roll the edge of PVC cylinder into the inner side. It will effect the transparent by the rolling. 
1. Easy to operate, do not need a skill operator. 
2. Easy to adjust for different size. 
3. One mould could make several size. 
4. Remote possibility of produce mistake rolling product. The machine roll the production manually which will have a lot of fault during the rolling operation. By this machine, all of the products will exact. 
5. Rolling two pieces at same time. Saving the labor cost. We accept the special order for rolling 3 pcs or 4 pieces machine. 
6.The function of S-31D is same as S-31, the only difference is that S-31D have 4 rolling device. 

Specification	S-31	S-31D
Max. High of Cylindrical	350 mm	350 mm
Max. Diameter of Product	210 mm	210 mm
Min. Diameter of Product	900 x 520 x 1430 mm	1800 x 520 x 1430 mm
Heater	300W x 2 Pieces	300W x 4 Pieces
Net Weight	250 Kgs	250 Kgs
Operation Speed	8-10 Sec/PCS x 2 Mould	8-10 Sec/PCS x 4 Mould

SUGGEST CO., LTD.
67 TA POO ROAD, CHANGHUA, TAIWAN, R.O.C 彰 化 市 大 埔 路 67號
TEL: 886-4-7111167, 7111168, 7110728, 
FAX: 886-4-7111169, 
EMAIL: sunjau@sunjau.com.tw